To clean your terminal, we recommend using a soft, micro-fibre cloth dampened with 70% isopropyl alcohol, non-toxic, non-bleach disinfectant safe cleaning fluid. Please take care to avoid run-off and do not allow any liquid to enter the plastic casing.


Care should be taken when cleaning the display as the use of excessive pressure or cleaning liquids can lead to the failure of the screen.   
  • For a smear-free finish, polish with a dry, clean, lint-free cloth.
  • DO NOT use any other janitorial products, acids, solvents, polishes or abrasives.
Cleaning the Sensor
  • Dampen a lint-free cloth or cotton swab with isopropyl alcohol, or an alcohol-based cleaning fluid which doesn’t leave any residue, e.g. DVD/CD head cleaning fluid – do not use Acetone or any other product likely to damage plastic.
  • Gently rub the cloth across the sensor surface in a left and right direction.
  • Move slowly down the sensor to cover the entire surface area.
  • Repeat this process 2 or 3 times.
  • Check that no residual solution remains on the sensor.
Caution: Take care not to scratch the surface of the sensor and do not use abrasive materials/ cleaners to remove residue from the sensor. Do not apply water to the sensor.
If you need help or have any additional questions, you can always contact us via
Written by: Protime
make time valuable